grid dip meter frequency pulling
2 posters
Page 1 of 1
Re: grid dip meter frequency pulling
Hope this is not too late to reply to this post.
I believe that the overall loop gain will affect the strength of oscillations. For example, at 100kHz there is no problem, but when the coil becomes a 1/2-turn at 450MHz then there could be a tendency for the oscillator to stop oscillating.
The GDO is a compromise between performance and simplicity.
BR Harry
EA/SM0VPO
I believe that the overall loop gain will affect the strength of oscillations. For example, at 100kHz there is no problem, but when the coil becomes a 1/2-turn at 450MHz then there could be a tendency for the oscillator to stop oscillating.
The GDO is a compromise between performance and simplicity.
BR Harry
EA/SM0VPO
_________________
Everything in this world is either bacon, or it isn't bacon
They say that money cannot bring you happiness, but if you have it then you can always buy more bacon
grid dip meter frequency pulling
Hello !
i'm working on a grid dip meter and i have some question about the design of such an oscillator
i Wonder if the averall loop gain do have an influence on the grid dip behavior (sensitivity, frequency pulling, freq stability, oscillating level stability) ?
my design looks like sm0vpo's . the only difference is that there is no c1a/c1c caps. the varcap i use has only two sections ~ 400p and ~ 100p
best regards
i'm working on a grid dip meter and i have some question about the design of such an oscillator
i Wonder if the averall loop gain do have an influence on the grid dip behavior (sensitivity, frequency pulling, freq stability, oscillating level stability) ?
my design looks like sm0vpo's . the only difference is that there is no c1a/c1c caps. the varcap i use has only two sections ~ 400p and ~ 100p
best regards
f4gsw- Posts : 3
Join date : 2015-03-10
Similar topics
» Arduino etc. (was: GRID DIP OSCILLATOR)
» GRID DIP OSCILLATOR by Harry Lythall - SM0VPO question
» Field strength meter
» Vu meter, RF probe, GDO queries
» AD8307 power meter
» GRID DIP OSCILLATOR by Harry Lythall - SM0VPO question
» Field strength meter
» Vu meter, RF probe, GDO queries
» AD8307 power meter
Page 1 of 1
Permissions in this forum:
You can reply to topics in this forum
|
|