New project on www.sm0vpo.com - HB Cinch-Jones power plug for FT-101ZD
Page 1 of 1
New project on www.sm0vpo.com - HB Cinch-Jones power plug for FT-101ZD
Hi again,
I am going to start portable operation from work in my lunch-break, but I need to power my FT-101ZD from 12v. I have NOT managed to find a suitable plug on the internet. So I made one with my 3D printer.
Small, silly project but it works :-)
http://213.114.131.21/3d/jones-plug_6.htm
BR Harry
I am going to start portable operation from work in my lunch-break, but I need to power my FT-101ZD from 12v. I have NOT managed to find a suitable plug on the internet. So I made one with my 3D printer.
Small, silly project but it works :-)
http://213.114.131.21/3d/jones-plug_6.htm
BR Harry
_________________
Everything in this world is either bacon, or it isn't bacon
They say that money cannot bring you happiness, but if you have it then you can always buy more bacon
Similar topics
» New project on HHH http://sm0vpo.altervista.org/ (www.sm0vpo.com later)
» New project on www.sm0vpo.com - For IVAN
» New project on www.sm0vpo.com - Basic HF / VHF filters
» New project on www.sm0vpo.com - 3D Printed Portable HF Antenna
» New project on www.sm0vpo.com - RF Window Transition Cable
» New project on www.sm0vpo.com - For IVAN
» New project on www.sm0vpo.com - Basic HF / VHF filters
» New project on www.sm0vpo.com - 3D Printed Portable HF Antenna
» New project on www.sm0vpo.com - RF Window Transition Cable
Page 1 of 1
Permissions in this forum:
You can reply to topics in this forum
|
|