Re: 8085 processor help

by Jalex2 Mon May 29, 2017 10:56 pm

Glenndk wrote:Please read (I know it is about the 4000):
http://www.fixya.com/cars/t14733854-1983_wurlitzer_omni_4000_power_comes

Hi Glenndk
Sorry I didn't see your post until now.
I went to that link and it was not found.
What do you know about the Wurlitzer omni series?
I have been working on one for quite a while now in my spar time.
I managed to free run the 8085 and now I don't think it's bad.
Jim

by Glenndk Mon Mar 27, 2017 9:15 pm

Please read (I know it is about the 4000):
http://www.fixya.com/cars/t14733854-1983_wurlitzer_omni_4000_power_comes

by Jalex2 Sun Apr 19, 2015 2:33 am

Hi all
I don't know if anyone could help here but I will ask anyway. I know this is a lot to ask. LOL
I am working on a Wurlitzer omni 6000 and it has an 8085 Processor that runs for a few ms then stops
Most of my experience is only in analogue so I know very little about digital other than the basics.
I assume the interrupts are stopping it but I don't know how to troubleshoot it.
It only has 2k Ram so I think it should be a simple circuit. I can post a manual page or two
if that would help. If I just knew what would stop it from running it would be a big help.
It's been sitting for about 25 years and it was my dad's so I have no idea if it was even running when
it was put in storage.
Thanks Jim

by Sponsored content